Post by somrat6islam222 on Feb 17, 2024 11:55:23 GMT
Also house the vertical structural supports. Likewise, the openings of the enclosure where the windows or doors are going to be located are elements that present a weak point or thermal bridge in the lintel area since in order to receive the load from the enclosure above it and transmit it to the jambs, It is usually carried out by means of a concrete joist, said joist is usually seen, without covering. Source: ANFAPA Insulation on the outside resolves these thermal bridges both in new construction and in rehabilitation since the entire thickness of the insulating element is through the building envelope. Another of the construction elements that are especially.
Susceptible to creating thermal bridges with the floors of balconies, terraces, etc. since they are surfaces free of enclosures or other covering elements. These elements must have a special treatment that ranges from insulation on both sides of the flown element to the application of insulation on the edge. Condensation reduction Condensation humidity occurs in the interior Phone Number List spaces of buildings, due to the change of state of the water vapor present in the air to the liquid phase. For this to occur, two circumstances can occur: a contribution of humidity (bathrooms and hot water) or a reduction in the capacity of the air due to cooling. Cooling is achieved by contact with a cold body, this cold.
Body can be the surface or interior faces of the enclosures. If temperatures exceed the dew point there will be condensation. This cooling is due to insufficient insulation of the façade. When condensation occurs on the interior surface of the enclosure (walls), it is called surface condensation and when the phenomenon occurs somewhere inside the enclosure, it is called interstitial condensation. To avoid these phenomena, we must be careful to raise the internal temperature of the internal surfaces (walls and ceilings) as in possible thermal bridges, placing the insulation towards the outside and making it pass through in front of all the structural elements. In the work in the execution phase this may.
Susceptible to creating thermal bridges with the floors of balconies, terraces, etc. since they are surfaces free of enclosures or other covering elements. These elements must have a special treatment that ranges from insulation on both sides of the flown element to the application of insulation on the edge. Condensation reduction Condensation humidity occurs in the interior Phone Number List spaces of buildings, due to the change of state of the water vapor present in the air to the liquid phase. For this to occur, two circumstances can occur: a contribution of humidity (bathrooms and hot water) or a reduction in the capacity of the air due to cooling. Cooling is achieved by contact with a cold body, this cold.
Body can be the surface or interior faces of the enclosures. If temperatures exceed the dew point there will be condensation. This cooling is due to insufficient insulation of the façade. When condensation occurs on the interior surface of the enclosure (walls), it is called surface condensation and when the phenomenon occurs somewhere inside the enclosure, it is called interstitial condensation. To avoid these phenomena, we must be careful to raise the internal temperature of the internal surfaces (walls and ceilings) as in possible thermal bridges, placing the insulation towards the outside and making it pass through in front of all the structural elements. In the work in the execution phase this may.